view cart
cart-icon0 item(s) £0.00
01254 389171

Floriani Cutaway Medium 12 x 10

Floriani Cutaway Medium 12 x 10
click images to enlarge
£11.99
£10.19
First Class Delivery only £2.95
Free on orders over £30 !

secure payments including PayPal

Full Description

Product Code: FCM1210

Floriani Cutaway Medium 12in x 10yds (30.48cm x 9.14M)

Floriani Medium Cutaway is a 2 oz stabiliser. It is manufactured using a unique process called the "Delta Wet Laid Non-Woven" technique. The benefit of using this method of production is that the product is very solid, when closely examined you will see no thick and/or thin spots. When used as an embroidery stabiliser, it is not necessary to use multiple layers in random directions to support stitches. Cutaways are ideal for fabrics that are considered un-stable; fabrics such as fleece, t-shirts, sweatshirts, polo knit, etc. Floriani Medium Cutaway is a very soft yet solid stabiliser that will support medium to heavy stitch count designs.

  • Use on non-stable stretch fabrics
  • Will support a design density of about 14,000 stitches and well digitized.
  • Super soft feel makes it ideal for sweatshirts, fleece and sweater knits.
  • Available in a fusible version which eliminates the need for spray adhesives or basting.
  • Also available in black for dark fabrics or garments.

To use Floriani Medium Cutaway:

  1. Cut a piece of the stabiliser at least one inch larger than the hoop size you are planning to use.
  2. Place the stabiliser to the wrong side of the fabric and hoop. Note! If using the fusible version, use a low to medium temp, dry iron (260°F, silk setting) to adhere to stabiliser to the back side of the fabric. The surface of the iron should touch the fabric not the stabiliser. Use a pressing cloth if necessary.
  3. Place the embroidery frame on the machine and complete the design. Note! If the design is denser than 14,000 stitches or if it is a poorly digitized design (too many stitches for the designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 10,000 stitches for added support.
  4. Once the design is complete, remove the hoop and garment from the machine and trim the stabiliser close to the design. If you have fused the stabiliser to the garment, apply heat and then pull it to the designs edge before trimming.

Customer Reviews
Write an online review and share your thoughts with other shoppers!