view cart
cart-icon0 item(s) £0.00
01254 389171

Floriani No Show Nylon Mesh 12 x 10 Biege (non-fusible)

Floriani No Show Nylon Mesh 12 x 10 Biege (non-fusible)
click images to enlarge
£18.99
£16.13
First Class Delivery only £2.95
Free on orders over £30 !

secure payments including PayPal

Full Description

Product Code: FMBE1210

Floriani No Show Nylon Mesh Beige 12" x 10yds (30.48cm x 9.14M)

No Show Mesh

"No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market.

Invisible Cutaway Stabiliser

Floriani No Show Nylon Mesh is a 1.5 oz sheer cutaway available in white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The unique embossing pattern of this product makes it a staple in your embroidery stabilisers. Hoop the stabiliser to the back of the garment or fabric for soft flexible support for light fabrics and designs. This product is also available in a fusible version which eliminates the need for messy spray adhesives.

No Show Nylon Mesh Cutaway

  • Will support around six to eight thousand stitches on an average size, well-digitised embroidery design (4" x 4").
  • Will not shadow through on light weight cottons and knits when worn against the skin.
  • Perfect foundation for crazy patch quilting.
  • Ideal foundation for patches, emblems and free standing embroideries.

To use Floriani No show Nylon Mesh:

  1. Cut a piece of the stabiliser at least one inch larger than the hoop size you are planning to use.
  2. Hoop the stabiliser to the back of the garment.
  3. Place the embroidery frame on to the machine. Complete the layout and centering of the design.
  4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitised design (too many stitches for designs size), "float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
  5. After the design is complete, remove the garment from the machine and embroidery hoop. Trim the stabiliser as close to the design as possible.

    *Tip! If embroidering knit, don't forget to use topping!

    *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilisation without stiffness.

No Show Nylon Mesh double


Customer Reviews
Write an online review and share your thoughts with other shoppers!